Neodymium flat bar with hole and countersink 80 x 13.5 x 5.0 mm holds 25 kg

Flat magnet with drill hole for screwing on

Flat bar neodymium magnets are very stable! The neodymium magnets are embedded in a metal pot that protects the neodymium magnet. The magnet has no magnetic holding force on the back (metal side), but is attached using the 2 countersunk holes. Of course, you can also glue the magnet in place.

The flat strip has 2 countersunk holes to screw it on with a standard countersunk screw.

We offer the magnet in 10 mm increments from 10 mm - 120 mm.

Please note when mounting: For flat bar magnets, we recommend a maximum tightening torque of 2 Nm.
 

Technical Data:

Material:

Neodym

Beschichtung:

Nickel

Höhe (mm):

5

Länge (mm):

80

Breite (mm):

13.5

Toleranz (± mm):

0.1

Gewicht (g):

38

Max. Einsatztemperatur (°C):

80

Haftkraft (g):

25000

Magnetisierung:

N35

Magnetisierungsrichtung:

axial