Neodymium flat bar with hole and countersink 120 x 13.5 x 5.0 mm holds 36 kg

Flat bar neodymium magnets are very stable! The neodymium magnets are embedded in a metal pot that protects the neodymium magnet. The magnet has no magnetic holding force on the back (metal side), but is attached using the 2 countersunk holes. Of course, you can also glue the magnet in place.

The flat strip has 2 countersunk holes to screw it on with a standard countersunk screw

The  120 mm neodymium flat strip is the longest version available. We offer the magnet in 10 mm increments from 10 mm - 120 mm

Please note when mounting: We recommend a maximum tightening torque of 2 Nm for flat bar magnets

You can find the next smaller size here:

Neodymium flat bar with hole and countersink 110 x 13.5 x 5.0 mm holds 33 kg

Technical Data:

Material:

neodymium

Coating:

Nickel

Height (mm):

5

Length (mm):

120

Width (mm):

13.5

Tolerance (± mm):

0.1

Weight (g):

59

Max. operating temperature (°C):

80

Adhesive force (g):

36000

Magnetization:

N35

Magnetization direction:

axial